libpynq (release 5EWC0-2023 version 0.2.6 of 2023-10-24 17:28)
|
Macros | |
#define | NUM_SWITCHBOX_NAMES 40 |
Typedefs | |
typedef enum io_configuration | io_configuration_t |
Enumerations | |
enum | io_configuration { SWB_GPIO = 0x00 , SWB_Interrupt_In = 0x01 , SWB_UART0_TX = 0x02 , SWB_UART0_RX = 0x03 , SWB_SPI0_CLK = 0x04 , SWB_SPI0_MISO = 0x05 , SWB_SPI0_MOSI = 0x06 , SWB_SPI0_SS = 0x07 , SWB_SPI1_CLK = 0x08 , SWB_SPI1_MISO = 0x09 , SWB_SPI1_MOSI = 0x0A , SWB_SPI1_SS = 0x0B , SWB_IIC0_SDA = 0x0C , SWB_IIC0_SCL = 0x0D , SWB_IIC1_SDA = 0x0E , SWB_IIC1_SCL = 0x0F , SWB_PWM0 = 0x10 , SWB_PWM1 = 0x11 , SWB_PWM2 = 0x12 , SWB_PWM3 = 0x13 , SWB_PWM4 = 0x14 , SWB_PWM5 = 0x15 , SWB_TIMER_G0 = 0x18 , SWB_TIMER_G1 = 0x19 , SWB_TIMER_G2 = 0x1A , SWB_TIMER_G3 = 0x1B , SWB_TIMER_G4 = 0x1C , SWB_TIMER_G5 = 0x1D , SWB_TIMER_G6 = 0x1E , SWB_TIMER_G7 = 0x1F , SWB_UART1_TX = 0x22 , SWB_UART1_RX = 0x23 , SWB_TIMER_IC0 = 0x38 , SWB_TIMER_IC1 = 0x39 , SWB_TIMER_IC2 = 0x3A , SWB_TIMER_IC3 = 0x3B , SWB_TIMER_IC4 = 0x3C , SWB_TIMER_IC5 = 0x3D , SWB_TIMER_IC6 = 0x3E , SWB_TIMER_IC7 = 0x3F , NUM_IO_CONFIGURATIONS } |
Functions | |
void | switchbox_init (void) |
void | switchbox_set_pin (const io_t pin_number, const io_configuration_t pin_type) |
void | switchbox_reset (void) |
void | switchbox_destroy (void) |
io_configuration_t | switchbox_get_pin (const io_t pin_number) |
Variables | |
char *const | switchbox_names [NUM_SWITCHBOX_NAMES] |
The switchbox enables run-time (re)mapping of I/O pins.
For example, the transmit output of UART 0 (SWB_UART0_TX) can be mapped to analog pins IO_AR0 & IO_AR1. Or the output of PWM 0 (SWB_PWM0) can be mapped to green LED 0 (pin IO_LD0). Or the output of PWM 0 (pin SWB_PWM0) can be mapped to the green component of color LED 0 (pin IOB_LD0).
#define NUM_SWITCHBOX_NAMES 40 |
Definition at line 135 of file switchbox.h.
typedef enum io_configuration io_configuration_t |
enum io_configuration |
Definition at line 62 of file switchbox.h.
|
extern |
Resets all pins of the switch box to be input.
Definition at line 112 of file switchbox.c.
|
extern |
Sets the mode of a specified pin.
pin_number | The IO pin number. |
Definition at line 162 of file switchbox.c.
|
extern |
Initializes the switch box.
Initializes the shared memory and sets the io switch base address
Definition at line 105 of file switchbox.c.
|
extern |
Resets all pins of the switch box to be input.
Definition at line 118 of file switchbox.c.
|
extern |
Set the type of a switch pin.
pin_number | The number of the IO pin to connect (IO_*, IO_LD0). |
pin_type | The FPGA hardware to connect to (SWB_*, e.g. SWB_PWM0). |
Definition at line 126 of file switchbox.c.
|
extern |
Taken from scpi_names.h, lookup table for channels in the mapping_info function.
Definition at line 25 of file switchbox.c.