IIC library

Enumerations
enum	iic_index_t { IIC0 = 0 , IIC1 = 1 , NUM_IICS = 2 }

Functions
void	iic_init (const iic_index_t iic)
void	iic_destroy (const iic_index_t iic)
bool	iic_read_register (const iic_index_t iic, const uint8_t addr, const uint8_t reg, uint8_t *data, uint16_t length)
bool	iic_write_register (const iic_index_t iic, const uint8_t addr, const uint8_t reg, uint8_t *data, uint16_t length)

Detailed Description

Functions to use the Inter-Integrated Circuit (IIC).

High-level functions to read/write to clients connected to the two integrated IIC modules.

Enumeration Type Documentation

iic_index_t

enum iic_index_t

Enum of IICs. Functions use a switch numbered from 0..NUM_IICS-1.

Enumerator
IIC0
IIC1
NUM_IICS

Definition at line 42 of file iic.h.

Function Documentation

iic_destroy()

void iic_destroy

(

const iic_index_t

iic

)

Close the shared memory handle for the specified IIC index.

Parameters

uart	The IIC index to remove from the shared memory space.

Warning

Fails with program exit if the IIC channel is outside valid range.

Definition at line 3 of file iic.c.

Here is the call graph for this function:

iic_init()

void iic_init

(

const iic_index_t

iic

)

Initialize the IIC specified by the index with a shared memory handle and a buffer size of 4096 bytes.

Parameters

uart	The IIC index to initialize.

Warning

Fails with program exit if the IIC channel is outside valid range or when the shared memory system has not been instantiated.

Definition at line 2 of file iic.c.

Here is the call graph for this function:

iic_read_register()

bool iic_read_register	(	const iic_index_t	iic,
		const uint8_t	addr,
		const uint8_t	reg,
		uint8_t *	data,
		uint16_t	length
	)

Parameters

iic	The IIC index to initialize.
addr	The IIC address of the client to access.
reg	The clients register address.
data	Buffer where the register content is stored. [out]
length	The amount of data to read.

Reads the content of the register into data.

Returns

0 if successful, 1 on error

Definition at line 4 of file iic.c.

Here is the call graph for this function:

iic_write_register()

bool iic_write_register	(	const iic_index_t	iic,
		const uint8_t	addr,
		const uint8_t	reg,
		uint8_t *	data,
		uint16_t	length
	)

Parameters

iic	The IIC index to initialize.
addr	The IIC address of the client to access.
reg	The clients register address.
data	Buffer where new the register content is stored.
length	The amount of data to write.

Writes data to register.

Returns

0 if successful, 1 on error

Definition at line 7 of file iic.c.

Here is the call graph for this function: